TM 55-1520-240-23-7
9-71
DISASSEMBLE LANDING LIGHT EXTEND GEARBOX (AVIM)
(Continued)
9-71
18.
Remove two screws (39) and washers (40).
Cut through sealant at edge of cover (41) and
housing (42). Remove cover.
19.
Remove three screws (43) and washers (44).
Remove housing (42) from gearbox (4).
20.
Remove four screws (45) and nuts (46). Cut
through sealant (47) around edge of relay (48)
extending through housing (42).
21.
Tag wires (49). Identify which side of housing
(42) wires route through.
22.
Remove relay (48) and two grommets (50) from
housing (42).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-242