TM 55-1520-240-23-7
8-13
INSTALL NO. 2 GAS PRODUCER TACHOMETER GENERATOR
(Continued)
8-13
3.
Position tachometer generator (4) on mount
pad studs (2) with receptacle (5) positioned at
2 o’clock.
4.
Install two washers (6) and nuts (7) on two
outboard studs (2). Do not tighten nuts at this
time.
5.
Position bracket (8) over two inboard studs (2).
6.
Install two washers (6) and nuts (7) on two
inboard studs (2). Tighten all four nuts (7).
NOTE
Check that packing on fitting is
servicable.
7.
Install fuel control fitting (9).
8.
Remove cap and connect oil scavenge hose (10)
to dual chip detector housing fitting (11).
9.
Connect drain hose (12).
10.
Connect drain hose (13).
11.
Connect drain hose (14).
12.
Connect drain hose (15).
13.
Connect clamp (16) to bracket (8). Install screw
(17), two washers (18), and nut (19).
8-40
