TM 55-1520-240-23-7
9-31
REMOVE MAIN AC GENERATOR
(Continued)
9-31
NOTE
Procedures are same for No. 1 or No.
2 generator. No. 2 is shown.
1.
Loosen eight fasteners (1) and remove panel (2)
to gain access to No. 2 ac generator wiring (3).
2.
Loosen two fasteners (4) and remove terminal
cover (5).
3.
Tag and disconnect wiring (3) by removing four
nuts (6) and washers (7). Tape ends. Disconnect
plug (8). Use tags (E264) and tape (E385).
Generator is heavy and can injure
personnel if it drops. Generator must
be held firmly and moved carefully to
prevent injury to personnel.
4.
Remove eight nuts (9) and washers (10) from
No. 2 ac generator (11).
Do not damage oil transfer tubes
when removing generator.
5.
Pull generator (11) straight back from
transmission (12) and two oil transfer tubes (13).
Remove generator.
6.
Remove packings (14) from transfer tubes (13).
7.
If generator (11) was removed because it failed,
inspect generator oil screen (Task 6-158.2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-101
