TM 55-1520-240-23-7
8-100
REMOVE HYDRAULIC MAINTENANCE PANEL COMPONENTS
(Continued)
8-100
NOTE
Procedure to remove UTILITY or No.
1/No. 2 FLIGHT CONTROL hydraulic
system level SIGNAL CONDITIONER
is the same. Removal of UTILITY
hydraulic system level SIGNAL
CONDITIONER is shown here.
2.
Remove UTILITY hydraulic system level SIGNAL
CONDITIONER as follows:
a.
Tag and disconnect wire harness connector
(14).
b.
Remove four screws (15) and washers (16).
c.
Tag and remove signal conditioner (17) from
panel (9).
3.
Remove aft transmission low oil pressure time
delay relay as follows:
a.
Tag and disconnect four wires (18).
b.
Remove three nuts (19) and washers (20).
c.
Tag and remove relay (21) from panel (9).
8-311