TM 55-1520-240-23-6
7-225
REMOVE INBOARD BRAKE MASTER CYLINDER
(Continued)
7-225
NOTE
Procedure is same to remove pilots
or copilots inboard cylinder. Pilots
inboard cylinder is shown here.
1.
Operate cockpit foot brake pedals ten times to
relieve system pressure.
1.1.
Tag and disconnect three hydraulic hoses (1)
from cylinder (2). Use container and cloths
(E120) for spilled fluid. Use gloves (E186).
2.
Remove cotter pin (3), nut (4), two washers (5),
and bolt (6).
3.
Hold cylinder (2). Remove cotter pin (7), nut (8),
two washers (9), and bolt (10). Remove cylinder.
4.
Remove three nipples (11) and packings (12)
from cylinder (2).
5.
Remove scupper (13) from shaft.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-846