TM 55-1520-240-23-6
7-169
INSTALL PRESSURE CONTROL MODULE PRESSURE TRANSMITTER
(Continued)
7-169
2.
Lockwire transmitter (1) to module (4). Use
lockwire (E231).
Electrical connectors are to be
tightened no more than 1/16 to
1/8 turn beyond finger-tight during
installation, otherwise they will be
damaged.
3.
Connect connector (7) to transmitter (1).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
Bleed utility hydraulic reservoir (Task 7-336).
END OF TASK
7-710
