TM 55-1520-240-23-6
7-155
INSTALL ENGINE START VALVES
(Continued)
7-155
NOTE
Procedure is same to install LH or RH
start valve. LH valve is shown here.
1.
Install two retainers (1), packing (2), six retainers
(3), and three packings (4) on valve (5).
2.
Install valve (5) in port (6). Use 1-3/8 inch
socket. Use cloths (E135) for spilled fluid.
3.
Lockwire valve (5) to valve (7). Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform functional check (TM 55-1520-240-T).
Bleed utility hydraulic reservoir (Task 7-335).
END OF TASK
7-679