TM 55-1520-240-23-6
7-129
REPAIR PIVOTING SERVOCYLINDER (AVIM) (Continued)
7-129
WARNING
Epoxy primer (E292) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat, sparks,
and open flame. Avoid contact with
skin, eyes, or clothing. In case of
contact, immediately flush skin or eyes
with water for at least 15 minutes.
Get medical attention for eyes.
9.
Coat bearing seat (18) area with epoxy primer
(E292) (Task 2-350.1). Wear gloves (E184.1).
10.
Install new bearing (15) in seat (18). Use arbor
press.
11.
Position plate (13) on lug (14). Install four new
screws (12).
NOTE
Lower lug bearing plates are installed
with four rivets.
Change 1
7-579
