TM 55-1520-240-23-6
7-98
TEST PITCH, ROLL, YAW, OR THRUST INTEGRATED LOWER CONTROL ACTUATOR
(ILCA) (AVIM) (Continued)
7-98
84.
Remove PIN 2 (69) from stowage. Insert PIN 2
in input arm (61) through fixture (70).
85.
Loosen rigging handle (71). Turn fixture (72) 90
clockwise. Tighten handle.
86.
Remove PIN 3 (73) from stowage. Install PIN 3
in output arm (74) and through slot in fixture (72).
Pin must slide freely.
NOTE
If PIN 3 (73) will not slide into the
fixture slot, the ILCA must be rigged.
87.
Remove and stow PIN 3 (73).
88.
Loosen handle (71). Turn fixture (72) 90
counterclockwise to stowed position. Tighten
handle.
89.
Remove and stow PIN 2 (69).
Change 1
7-427