TM 55-1520-240-23-6
7-59
INSTALL NO. 1 OR NO. 2 POWER TRANSFER UNIT MODULE
(Continued)
7-59
10.
Remove lockwire from plug (19). Remove plug
and packing (20) from motor (21).
11.
Fill motor (21) with hydraulic fluid (E199). Use
hand oiler.
12.
Install plug (19) and packing (20) in motor (21).
13.
Lockwire plug (19) to module (1). Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Service reservoir (Task 1-60, 1-61, or 1-62).
Bleed utility hydraulic system (Task 7-334).
Perform operational check (TM 55-1520-240-T).
Close right forward work platform or pylon access
doors (Task 2-2).
END OF TASK
7-280