TM 55-1520-240-23-6
7-51
INSTALL NO. 1 OR NO. 2 POWER CONTROL MODULE ACCUMULATOR
(Continued)
7-51
NOTE
There are two accumulators, one
in No. 1 and one in No. 2 module.
Procedure is same to install any
accumulator. No. 1 module is shown
here.
1.
Install fitting (1) and packing (2) in accumulator
(3).
2.
Install accumulator (3), two retainers (4), and
packing (5) in module (6). Tighten accumulator.
Use open end wrench.
7-255