TM 55-1520-240-23-6
7-25
INSTALL HYDRAULIC PUMP COUPLING AND SEAL (AVIM)
(Continued)
7-25
4.
Install packing (12) on ring (13).
5.
Install ring (13) on shaft (2), threaded holes (14)
outboard.
6.
Position retainer (15) in pump (3). Install four
washers (16) and screws (17). Use 9/64 inch
socket key.
7.
Fill shaft (2) one third full of grease. Use grease
(E190).
8.
Install packing (18) in groove (19) of coupling
(20).
9.
Install coupling (20) in shaft (2), small end inward.
10.
Slide sleeve (21) on screw (22). Install screw
in coupling (20). If screw turns freely, replace
screw.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform functional test (Task 7-26).
END OF TASK
7-163