TM 55-1520-240-23-6
7-274
ADJUST CARGO RAMP ACTUATING CYLINDERS
(Continued)
7-274
8.
Remove lockwire and loosen nut (8) on left or
right cylinder to be adjusted. Right shown.
NOTE
One turn moves ramp about 0.08
inch.
9.
Turn cylinder (9) clockwise. Use wrench on flats
(10).
10.
Repeat steps 2, 3 thru 5. Then go to step 11.
11.
Torque nut (8) to 1200 inch-pounds.
12.
Lockwire nut (8) to washer (11). Use lockwire
(E231).
SEALING STRIP IS COMPRESSED TOO MUCH ON
ONE OR BOTH SIDES
13.
Perform steps 6 thru 8. Then go to step 14.
14.
Turn cylinder (9) counterclockwise. Use wrench
on flats (10).
NOTE
One turn moves ramp about 0.08
inch.
15.
Repeat steps 2, 3 thru 4. Then go to step 16.
16.
Torque nut (8) to 1200 inch-pounds.
17.
Lockwire nut (8) to washer (11). Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
END OF TASK
7-1025