TM 55-1520-240-23-6
7-274
ADJUST CARGO RAMP ACTUATING CYLINDERS
(Continued)
7-274
5.
Check that sealing strip (6) is evenly compressed
about 0.1 inch against ramp (7) on both sides
of ramp. If sealing strip is not compressed on
one or both sides go to step 6. If sealing strip is
compressed too much on one or both sides go
to step 13.
SEALING STRIP IS NOT COMPRESSED ON ONE OR
BOTH SIDES
6.
Set ramp control handle (5) to DN. Position ramp
fully down.
7.
Set ramp control handle (5) to STOP.
7-1024
