TM 55-1520-240-23-5
6-10.1
CLEAN AND INSPECT DRIVE SHAFTING OFF AIRCRAFT
6-10.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Aircraft Maintenance Tool Kit, NSN 5180-00-323-5114
Light Source
Torque Wrench, 30-1520 Inch-Pounds
Torque Wrench, 700-1600 Inch-Pounds
Bucket, 4 Gallon
Materials:
Tape (E385.1)
Brush (E85.2)
Alcohol (E64)
Cloth, Cleaning (E120)
Gloves (E184.1)
Grease (E190)
Antiseize Compound (E75)
Cleaning Compound (E117.1)
Dry Cleaning Solvent (E162)
Goggles (E473)
Personnel Required:
CH-47 Helicopter Repairer
Inspector
Parts:
Cotter Pin
References:
Task 6-2
Task 6-3
Task 6-11
Task 6-12
Task 6-21
TM 1-1500-335-23
TM 55-1520-240-23P
Equipment Condition:
Off Aircraft
General Safety Instructions:
WARNING
Alcohol (E64) is flammable and
toxic. Avoid inhaling. Use only with
adequate ventilation. Keep away
from heat, sparks, or open flame. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
WARNING
Antiseize compound (E75) can form
toxic vapors if exposed to flame.
Use in a well-ventilated area, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
WARNING
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
plenty of water for at least 15 minutes.
Get medical attention for eyes.
6-34
Change 1
