TM 55-1520-240-23-5
6-107
INSTALL ENGINE TRANSMISSION
(Continued)
6-107
11.
On right installation, connect hose (17) to elbow
(18). Connect hose (19) to reducer (20).
12.
On left installation, connect hose (21) to elbow
(22). Connect hose (23) to reducer (24).
13.
Connect breather hose (25) to reducer (26).
Torque to 75 inch-pounds.
14.
Install breather hose clamp (27) on clip (28) with
screw (29), washer (30), and nut (31).
15.
Connect connector (32) to temperature and chip
detector (33).
16.
Position clamp (34) with temperature and chip
detector wiring (35) against clip (36) on lower
lifting lug (37). Install screw (38) and nut (39).
17.
With 37 , connect connector (40) to chip detector
connector (41).
INSPECT
FOLLOW-ON MAINTENANCE:
Install engine transmission adapter assembly and
engine drive shaft (Task 6-32).
Close pylon hinged fairing (Task 2-2).
Install engine transmission fairing (Task 4-73).
Install engine air inlet screen (Task 4-76).
Service engine transmission (Task 1-54).
Perform ground run (TM 55-1520-240-10).
END OF TASK
6-426
