TM 55-1520-240-23-5
6-107
INSTALL ENGINE TRANSMISSION
(Continued)
6-107
5.
Connect sling (T34) (8) to lifting lug (9). Connect
work hoist hook (10) to sling (T34).
Transmission is heavy and can injure
personnel if it drops. Transmission
must be supported by hoist and
moved carefully to prevent injury to
personnel.
6.
Attach guide line (11) to transmission (12).
7.
Have helper raise hoist hook (10) to align
transmission (12) with engine (1). Use guide line
(11) to guide transmission. Align dowel pin (13)
with hole (14) in engine.
NOTE
Dowel pin hole is at 1 o’clock position
on engine.
8.
Install transmission (12) on quill shaft (6) and 8
studs (15). Make sure dowel pin (13) aligns in
engine hole (14).
9.
Install eight washers (15) and nuts (16).
Lubricate all threads with oil (E254). Torque nuts
to 300 to 330 inch-pounds.
10.
Remove work hoist hook (10) from sling (T34)
(8). Remove sling from lifting lug (9). Remove
guide line (11).
6-425
