TM 55-1520-240-23-5
6-2
REMOVE NO. 1 DRIVE SHAFT
(Continued)
6-2
Rotor blades will turn when shaft
rotates. Turning blades can injure
personnel. Keep clear of blades as
they turn.
NOTE
Remove bolt from mount at each side
of adapter assembly in same way.
Right side shown here.
2.
Rotate shaft (4) to align one of the bolt holes in
adapter assembly (6) with mount bushing (7).
3.
Support shaft (4) with cloths (E120) or barrier
material (E80) (8).
4.
Remove nut (9), washers (10), and bushing bolt
(11). Remove bolt through bolt hole in adapter
assembly (6). Use socket and extension.
5.
Remove three bolts (3) and special washers (12)
from shaft (4) and forward transmission adapter
assembly (6).
6-13
