TM 55-1520-240-23-5
6-47
DISASSEMBLE FORWARD TRANSMISSION PACKAGE
(Continued)
6-47
REMOVE SWIVELING SERVOCYLINDER
16.
Remove cotter pin (53), nut (54), two washers
(55), and bolt (56) from lower end of link (57).
17.
Disconnect link (57) from bellcrank (58).
Do not bend tubes on servocylinder
during removal.
18.
Remove cotter pin (59), nut (60), and washer
(61) from back of lug (62).
19.
Have helper support servocylinder (63). Remove
bolt (64) and washer (65). Lower and remove
servocylinder from lug (62).
REMOVE PIVOTING SERVOCYLINDER
20.
Remove cotter pin (66), nut (67), two washers
(68), and bolt (69) from lower end of link (70).
21.
Disconnect link (70) from bellcrank (71).
NOTE
Check valves must be removed for
clearance.
22.
Disconnect two tubes (72) from check valves
(73).
23.
Remove check valves (73) from servocylinder
(74).
Do not bend tubes on servocylinder
during removal.
24.
Remove cotter pins (75), nuts (76) and washers
(77) from back of two lugs (78).
25.
Have helper support servocylinder (74). Remove
bolts (79) and washers (80). Lower and remove
servocylinder from lugs (78).
26.
Install check valves (73) in servocylinder (74).
Connect tubes (72) to check valves.
6-169
