TM 55-1520-240-23-5
6-35
REPAIR TRANSMISSION SUMP (AVIM)
6-35
INITIAL SETUP
Applicable Configurations:
All
Tools:
Airframe Repairers Tool Kit, NSN 5180-00-323-4876
Shot Bags or Equivalent
Gram Scale, 100 Gram Capacity
Tee, 1/4 Inch
Source of Vacuum
Infrared Lamp, 140º to 160ºF
Materials:
Abrasive Paper, 120 Grit (E7)
Abrasive Paper, 280 Grit (E10)
Kevlar Fabric, Style 285 or 281 (E209)
Wood Spatula (E424)
Polyethylene Cup (E157)
Brush (E86)
Teflon Tape (E399)
Adhesive (E47)
Hardener (E192)
Gloves (E184.1)
Acetone (E20)
Peel Ply (E270)
Epoxy Primer (E292 or E293)
Epoxy Coating (E137)
Methyl-Ethyl-Ketone (E244)
Black Lacquer (E462)
Polyurethane Paint (E285.1)
Cloths (E120)
Teflon Impregnated Fabric (E170)
Temperature Indicating Strips (E413)
Personnel Required:
Aircraft Structure Repairer
Inspector
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
Acetone (E20) is extremely flammable.
It can be toxic. It can irritate skin
and cause burns. Use only in a
well-ventilated area, away from heat
and open frame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Epoxy resin adhesive (E47) is toxic.
It can irritate skin and cause burns.
Avoid contact with skin, eyes, and
clothing. Do not inhale. Use only
with adequate ventilation. Keep away
from heat, sparks, or open flame. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
6-112
