TM 55-1520-240-23-4
5-137
REPAIR WEATHER-PROTECTIVE COVER (AVIM)
5-137
INITIAL SETUP
Applicable Configurations:
Without
15
Tools:
Airframe Repairer’s Tool Kit, NSN 5180-00-323-4876
Hypodermic Syringe
Heat Lamp
Scissors
Trip Balance, NSN 6670-00-401-7195
Electric Drill
Drill Bits
Shot Bags
Aluminum Wedges, 0.040 Inch Tapered to 0.016 Inch
Aluminum Wedges, 0.125 Inch Tapered to 0.016 Inch
Vacuum Supply and Vacuum Gage, 0 to 30 Inches Hg
Stopwatch
Stiff-Bristle Brush
Bolts AN3-4A (2)
Nuts EWSN22-3 (2)
Washers AN960-PD10 (2)
C-Clamps
Materials:
Abrasive Paper (E6 and E7)
Acetone (E20)
Adhesive (E27)
Adhesive (E40 and E41)
Adhesive (E47)
Adhesive Pack (E50)
Cloth (E120)
Filler (E171)
Polyvinyl Sheet (E284)
Glass Cloth (E130 and E132)
Gauze (E183)
Gloves (E186)
Hardener (E191)
Hardener (E193)
Hardener (E194)
Teflon Fabric (E170)
Rubber Sheet (E321)
Sealing Tape (E396)
Plastic Cups (E157)
Toluene (E423)
Tongue Depressors (E424)
Temperature Indicating Strips (E413)
Squeeze Bottle (E366)
Resin (E312)
Personnel Required:
Aircraft Structural Repairer (2)
Inspector
References:
TM 55-1520-240-23P
TM 1-1520-253-23
Equipment Condition:
Off Helicopter Task
Pitch Link Boots Removed (Task 5-134)
General Safety Instructions:
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
5-743
