TM 55-1520-240-23-4
5-132
INSTALL FORWARD SWASHPLATE
(Continued)
5-132
5.1.
Coat bushing OD and bolt shank with antiseize
compound (E75). Do not get antiseize compound
on bolt thread.
6.
Install bolts (19), washers (20), and nuts (21) in
actuating cylinders (22 and 23). Torque nuts to
400 to 680 inch-pounds (including cotter pin
installation). A third washer (AN960-816L) may
be required for cotter pin alignment. Install cotter
pins (24).
7.
Connect connector (25) to magnetic phase
detector (26).
8.
Lower hoist chain (6).
9.
Remove guide line (7).
10.
Remove three quick-release pins (3). Remove
controls sling (T14) (1).
5-728
