TM 55-1520-240-23-4
5-116
REMOVE FORWARD SWASHPLATE
(Continued)
5-116
4.
Remove connector (10) from magnetic phase
detector (11).
NOTE
If magnetic phase detector needs
replacing, remove, replace, and
torque nut (11.1) to 44 to 45
inch-pounds.
5.
Remove cotter pin (12), nut (13), washer
(14), and bolt (15) from upper end of both
servocylinders (16 and 17).
If actuator or link drop, they can be
damaged or cause damage to other
components.
6.
Remove cotter pins (18), nuts (19), washers (20),
and bolts (21) from actuator (22) and link (23).
Have helper support actuator and link and lower
slowly.
5-660