TM 55-1520-240-23-4
5-116
REMOVE FORWARD SWASHPLATE
(Continued)
5-116
NOTE
Positive retention bolts are installed in
the upper controls. They have a pawl
which prevents nut or bolt removal
unless the pawl is depressed (Task
1-14).
Swashplate is also removed as part of
forward transmission package (Task
6-47).
1.
Remove lockwire. Remove 12 bolts (1) and
washers (2). Remove slider shaft seal (3).
2.
Attach sling (T14) (4) to three lugs (5) as follows:
a.
Remove three quick-release pins (6).
b.
Position links (7) on lugs (5).
c.
Install pins (6).
3.
Attach hoist chain (8) to sling (T14) (4). Raise
hoist to take-up slack from sling cables (9).
5-659