TM 55-1520-240-23-4
5-67.2
REPAIR BLADE FAIRING SKIN DAMAGE
5-67.2
INITIAL SETUP
Applicable Configurations:
All
Tools:
Airframe Repairer’s Tool Kit, NSN 5180-00-323-4876
Scissors
Sanding Block
Pencil Compass
Vacuum Pump
Protective Clothing
Respirator
Trip Balance, NSN 6670-00-401-7195
Heat Lamp
Materials:
Wire Mesh (E453)
Acetone (E20)
Gloves (E186)
Abrasive Paper (E6, E7, E9)
Masking Tape (E388)
Cloth (E120)
Adhesive (E40 or E41)
Polyethylene Cup (E157)
Tongue Depressor (E424)
Peel Ply (E270)
Teflon-Impregnated Fabric (E170)
Rubber Pad (E318)
Glass Cloth (E132)
Sealing Tape (E396)
Polyvinyl Sheet (E284)
Temperature Indicating Strips (E413)
Fiberglass Laminate (E168 or E168.1)
Personnel Required:
Aircraft Structural Repairer
Inspector
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
Adhesive (E40 or E41) is extremely
flammable. It is volatile. It forms
harmful vapors and explosive
peroxides. Keep away from heat,
sparks, or open flame. Avoid inhaling.
Use only with adequate ventilation.
5-342
