TM 55-1520-240-23-4
5-66.2
REPAIR TITANIUM NOSE CAP CRACKS (AVIM)
(Continued)
5-66.2
c.
Within 24 hours after priming, wipe repair
area (27). Use clean cloth (E120) damp
with aliphatic naphtha (E245). Wear
gloves (E184.1). Wipe dry before naphtha
evaporates. Use clean cloth (E120).
Lacquer (E215) is extremely
flammable. It can be toxic. Keep away
from heat, sparks, or open flame. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
Thinner (E415) is flammable and toxic.
It can irritate skin and cause burns.
Use only with adequate ventilation,
away from heat or open flame. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
d.
Thin lusterless black lacquer (E215). Use
thinner (E415). Follow manufacturer’s
instructions.
e.
Apply two coats of thinned lacquer (E215) to
repair area. Wear gloves (E184.1). Allow to
dry 45 minutes between coats.
INSPECT
FOLLOW-ON MAINTENANCE:
Adjust tracking weights (Task 5-82.1).
END OF TASK
5-319
