TM 55-1520-240-23-4
5-58
REMOVE CENTRIFUGAL DROOP STOP BALANCING ARM
(Continued)
5-58
2.
Remove cotter pin (7), nut (8), and washer (9).
3.
Remove shaft (10) and four spacers (11).
Remove balancing arm (1).
4.
Deleted.
5.
Remove two nuts (14) and washers (15).
Remove bolt (13).
6.
Deleted.
7.
Remove interposer support (17) and interposer
block (18).
8.
Remove two bearings (19). Use drift.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-254