TM 55-1520-240-23-4
5-41
INSTALL HORIZONTAL HINGE PIN BEARING CAP
(Continued)
5-41
2.
Install torque wrench socket (T5) (5) on bearing
cap (4).
3.
Install bolt (6) with washer (6.1) in wrench socket
(5). Hand-tighten bolt.
4.
Install socket (6.2) over hex of wrench socket (5).
4.1.
Apply antiseize compound (E75) to horizontal
hinge pin bearing cap (4) threads.
4.2.
Torque bearing cap (4) to 590 foot-pounds.
4.3.
Wipe excess lubricant off, leaving only a thin
film. Remove bolt (6) and washer (6.1). Remove
torque wrench socket (5).
5-180
