TM 55-1520-240-23-4
5-29
INSTALL VERTICAL HINGE PIN OIL TANK
(Continued)
5-29
14.
Turn tank (5) clockwise by hand until tank
contacts lug (9). Tighten tank handtight.
15.
Remove guide (T33) (1).
16.
If tank (5) is a replacement, install two sight
indicators (10) and packings (11). Torque sight
indicators to 125 inch-pounds.
17.
Service oil tank (5) (Task 1-57).
18.
Install filler/drain plugs (12) and packings (13).
Torque plugs to 85 inch-pounds.
19.
Lockwire plugs (12) to sight indicators (10).
Lockwire tank (5) to manifold (14). Use lockwire
(E231).
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
20.
Wipe excess grease from tank (5), seal (2), and
thread (15). Use cloth (E120) damp with solvent
(E162). Wear gloves (E186).
INSPECT
FOLLOW-ON MAINTENANCE:
Install vertical hinge pin nuts (Task 5-84).
Close work platform (Task 2-2).
Pressure test (Task 5-5).
END OF TASK
5-148
