TM 55-1520-240-23-3
3-19
REMOVE FORWARD LANDING GEAR AIR VALVE SUPPORT BRACKET
3-19
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Forward Landing Gear Jacked (Task 1-23)
Inboard Wheel Removed (Task 3-7) To Access Right
Landing Gear Air Valve Bracket (Shown Here) or
Outboard Wheel Removed (Task 3-7) To Access Left
Landing Gear Air Valve Bracket
Forward Brakes Removed (Task 3-77)
NOTE
Procedure is same for removing left or
right air valve bracket. Right bracket is
shown here.
1.
Remove lockwire from air valve (1), screws (2),
and clamp (3).
2.
Remove two screws (2) and washers (4).
3.
Remove clamp (3).
4.
Remove two bolts (5), nuts (6), and four washers
(7).
5.
Remove bracket (8).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-59
