TM 55-1520-240-23-3
3-18
INSTALL FORWARD LANDING GEAR TORQUE ARM
3-18
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Aircraft Towbar, AA1730-1251
Materials:
None
Parts:
Cotter Pin
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 1-88
Task 3-12
Task 3-83
NOTE
Procedure is same for installing left or
right landing gear torque arm. Left
torque arm is shown here.
1.
Position torque arm (1) on shock strut (2).
2.
Check that jack pad (3) is on bottom of torque
arm (1).
3.
Align torque arm (1). Use helicopter towbar.
Install two shafts (4), bushings (5), bolts (6),
washers (7), and nuts (8) on both ends of torque
arm (1).
4.
Torque nuts (8) to 60 inch-pounds.
INSPECT
3-57