TM 55-1520-240-23-3
3-14
REMOVE FORWARD LANDING GEAR AXLE
(Continued)
3-14
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
NOTE
Procedure is same for removing left
or right inboard or outboard forward
landing gear axle. Left side outboard
is shown here.
1.
Clean grease from axle (1) with solvent (E162)
and cloths (E120). Wear gloves (E186).
2.
Remove two cotter pins (2) and nuts (3).
3.
Remove bracket (4) from inboard axle (1).
4.
Remove bolts (6).
5.
Remove two axles (1) from shock strut (8). Use
mallet.
FOLLOW-ON MAINTENANCE:
Inspect axle (Task 3-13).
END OF TASK
3-51
