TM 55-1520-240-23-3
4-68.4
REPLACE ENGINE SCREEN BYPASS PANEL FASTENERS
(Continued)
4-68.4
REPLACE RECEPTACLE
11.
Drill out two rivets (10) securing receptacle (11)
to screen (12). Remove receptacle.
12.
Remove adhesive residue and debris from
screen (12). Use solvent (E161) and cloths
(E120).
13.
Position new receptacle (11) on screen (12).
Install receptacle on screen with two rivets (10).
14.
Mix adhesive (E43) (Task 2-317) and apply
adhesive to rivet heads (10).
15.
Allow adhesive to cure. Apply one coat of epoxy
primer (E292) and two coats of epoxy topcoat
(E166).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-299
