REPLACE ENGINE SCREEN BYPASS PANEL FASTENERS (Continued)

REPLACE ENGINE SCREEN BYPASS PANEL FASTENERS (Continued) - TM-55-1520-240-23-3_535

REPLACE ENGINE SCREEN BYPASS PANEL FASTENERS (Continued) - TM-55-1520-240-23-3_537

TM-55-1520-240-23-3 CH-47D Heilcopter Manual
Page Navigation
506

TM 55-1520-240-23-3 4-68.4 REPLACE ENGINE SCREEN BYPASS PANEL FASTENERS (Continued) 4-68.4 6. Insert new stud (5) in panel (3) with washer (8) under stud head (9). 7. Install retainer ring (4) on stud (5) on back side of panel (3). INSPECT NOTE Do not apply adhesive to panel. 8. Prepare adhesive (Task 2-317). Apply light coat of adhesive to bonding surface (7) of retainer (2). 9. Position retainer (2) on panel (3). Align holes in retainer with holes in panel. Install four rivets (1). Allow adhesive to cure. INSPECT 10. Apply primer (E292) and two coats of epoxy topcoat (E166). 4-298

Privacy Statement
Press Release
Contact