TM 55-1520-240-23-3
3-78
DISASSEMBLE BRAKES
(Continued)
3-78
4.
Remove nut (7) and bushing (8).
5.
Apply pressure to adjustment pin (9) and remove
cylinder head (10) from piston (11). Use arbor
press.
6.
Remove three grips (12) and washer (13) from
cylinder head (10).
7.
Remove packings (14 and 15) and retainer (17)
from piston (11).
8.
Repeat steps 4 and 5 for two cylinder head
assemblies (5 and 6).
9.
Remove screw (18), washer (19), valve (20),
adapter (21), and packing (22) from brake
housing (3).
10.
Remove lockwire, bushing (23), and packing (24).
11.
Remove plug (25) and packing (26) from bushing
(23).
12.
Remove two expansion plugs (27) from brake
housing (3).
13.
Remove two drive screws (28) and plate (29)
from brake housing (3).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-208