TM 55-1520-240-23-11
17-5
DISASSEMBLE EMERGENCY EXIT LIGHT
(Continued)
17-5
REMOVE LAMPS
5.
Pull main lamp (8) from holder (9).
6.
Remove screw (10), washer (11), and holder
(12).
7.
Push two lamps (13) from holder (12).
REMOVE CIRCUIT BOARD
8.
Remove two retaining rings (14), screws (1),
and four washers (15) from end of circuit board
(16) in base (2).
9.
Unsolder three contacts (17) and remove circuit
board (16) from base (2).
DISASSEMBLE HOUSING
10.
Remove two screws (18) and washers (19).
11.
Remove bar (handle) (20) from housing (3).
17-13
