TM 55-1520-240-23-10
16-119
REPLACE EAPS SCAVENGE BLOWER ASSEMBLY
16-119
INITIAL SETUP
Applicable Configurations:
All
Tools:
Mechanic’s Tool Kit, NSN 5180-00-323-4692
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Remove EAPS (Task 16-109)
Diffuser Duct Removed (Task 16-118)
Battery Disconnected (Task 1-39)
Electrical Power Off
REMOVE
1.
Disconnect electrical plug from scavenge blower
receptacle (5).
2.
Remove eight screws (6), eight washers (7), and
scavenge blower (4) from scavenge duct (8).
INSTALL
3.
Install scavenge blower (4), eight screws (6), and
eight washers (7) in scavenge duct (8).
4.
Connect electrical plug to receptable (5) on
scavenge blower (4).
INSPECT
FOLLOW-ON MAINTENANCE:
Replace diffuser duct (Task 16-118).
Install EAPS (Task 16-110).
END OF TASK
16-380
