TM 55-1520-240-23-10
16-73
INSTALL BACK ARMOR PANEL
(Continued)
16-73
2.
Install top bracket (3) as follows:
a.
Install bracket (3) on seat bucket (4). Use
four screws (5) and washers (6).
b.
Install harness guide (7) on bracket (3).
Install two nuts (8) and washers (9).
3.
Install mounting plate assembly (10) and
shoulder armor panel (11) as follows:
a.
Install mounting plate assembly (10) on back
armor panel (1). Use four screws (12) and
washers (13).
b.
Remove hinge pin (14) from hinge halves (15
and 16) on mounting plate assembly (10).
c.
Position spacer (17) on shoulder armor panel
(11). Leave top insert (18) unused.
NOTE
Pilot’s seat hinge has four screws.
Copilot’s seat hinge has three screws.
d.
Position hinge half (15) over spacer (17).
Install screws (19).
e.
Align hinge halves (15 and 16). Install hinge
pin (14).
16-279
