TM 55-1520-240-23-10
16-72
REMOVE BACK ARMOR PANEL
(Continued)
16-72
7.
Remove eight screws (20) and washers (21) from
two aft bottom armor brackets (22). Remove
brackets.
8.
Remove four screws (23) and washers (24) from
side armor aft bracket (25). Remove bracket.
9.
Remove shoulder armor panel (26) and mounting
plate assembly (27) as follows:
a.
Disconnect exerciser cord (28) from mounting
plate assembly (27).
NOTE
Pilots seat hinge has four screws.
Copilots seat hinge has three screws.
b.
Swing shoulder armor panel (26) aft. Support
panel and remove screws from hinge half
(30).
c.
Remove panel (26), hinge half (30), and
spacer (31) from mounting plate assembly
(27).
d.
Remove four screws (32) and washers (33).
Remove mounting plate assembly (27).
16-276