TM 55-1520-240-23-10
16-55
TEST FLARE DISPENSER SYSTEM
(Continued)
16-55
1.
Connect multimeter (1) to pins A (2) and B (3).
Multimeter, set to RX1000, shall indicate more
than 3000 ohms.
2.
Disconnect multimeter (1) from pin B (3) and
connect to ground. Multimeter shall indicate
more than 3000 ohms.
3.
Disconnect and remove multimeter (1).
4.
Install countermeasures control indicator (4) (TM
11-1520-240-23).
5.
Apply electrical power.
16-241