TM 55-1520-240-23-10
16-33
INSTALL FORWARD OR AFT CARGO HOOK EXTERNAL MANUAL RELEASE
CABLE
(Continued)
16-33
Improper adjustment of release cable
can result in loss of external load.
Personnel can be injured or killed.
12.
Push up release arm (12).
13.
Make sure clearance is 0.00 to 0.20 inch
between ball end (15) and ‘X’ of arm (12).
13.1.
If gap is not within limits, adjust forward or aft
cargo hook manual release cable (Task 16-35.1).
14.
Clean and dry window (11), and area around
hold. Use cloths (E120).
15.
Position window (11) on bolt (10). Tighten bolts
(10 and 17). Torque two bolts (10 and 17) to
40 inch-pounds. Lockwire bolts, cable adapter
fitting (14) and nut (16) together. Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
END OF TASK
16-182
