TM 55-1520-240-23-10
12-13
INSTALL FIRE DETECTION SENSING ELEMENT
(Continued)
12-13
INSTALL LEFT SECTION
NOTE
Left section of element is outboard
on No. 1 engine, inboard on No. 2
engine.
26.
Remove caps from element (16).
27.
Bend element (16) as shown. Element must
follow locations of six clamps (2) and two
brackets (3 and 9). Follow guidelines in step 3
when bending element.
28.
Make sure insert (10) is in connector (17), white
dot (12) first.
29.
Connect element (16) to connector (17) at
bracket (3).
30.
Install six bushings (6) on element (16), one at
each clamp (2) location. Slits in bushings shall
be toward outside of bends in element.
31.
Press element (16) and bushing (6) into clamp
(2) at six locations. Bushings shall be centered
in clamps.
32.
Lock each clamp (2) with fastener (7).
33.
Torque end of element (16) to 65 inch-pounds.
12-41
