TM 55-1520-240-23-10
16-28
ADJUST FORWARD OR AFT CARGO HOOK SWITCHES (AVIM)
(Continued)
16-28
59.
Remove lockwire (12) routed through adaptor
(13) to arm (14).
60.
Position inspection window (11). Install two bolts
(9) and washers (10).
61.
Torque bolts (9) to 40 inch-pounds.
62.
Lockwire bolts (9) and cable adapter (13)
together. Use lockwire (E231).
63.
Remove twine used to support solenoid cover
(6). Make sure gasket (43) is positioned.
64.
Position solenoid cover (6). Install eight bolts
(4) and washers (5). Torque bolts alternately,
following torque sequence shown, to 60
inch-pounds. Check torque again after torquing.
65.
Lower hoist (1). Remove hook (3) and wire rope
ring (2).
FOLLOW-ON MAINTENANCE:
Pressure test solenoid cover (Task 16-30).
Functional test external cargo hook (Task 16-29).
END OF TASK
16-159