TM 55-1520-240-23-10
16-26
INSTALL FORWARD OR AFT CARGO HOOK THREADED INSERTS (AVIM)
(Continued)
16-26
8.
Remove excess primer from around insert hole
(1) at both inside and outside of front cover (2).
Use cloth (E120) moist with dry cleaning solvent
(E162). Wear gloves (E184.1) and goggles.
9.
Check insert (3) and keys (5). Insert and keys
shall be flush to 0.010 inch below outside
surface of front cover (2).
INSPECT
INSTALL 10-32 OR 1/4-28 INSERT IN REAR COVER
10.
If insert hole (6) in rear cover (7) has sealant
inside rear cover, scrape sealant away.
11.
Clean any debris from inside and around insert
hole (6) at both inside and outside rear cover
(7). Use dry cleaning solvent (E162) and low
pressure compressed air. Wear gloves (E184.1)
and goggles.
NOTE
Avoid violent agitation of sealant mix,
it reduces working time of sealant.
Do not fill threaded portion of insert
with sealant.
12.
Coat insert hole (6). Use sealant (E335) and
brush (E86). Wear gloves (E184.1).
13.
Select insert tool (8) as follows:
INSERT SIZE
TOOL NO.
10-32
TD1032L
1/4-28
TD428L
14.
Position insert (9) on tool (8).
15.
Install insert (9) in hole (6) while sealant is wet.
16-136
