TM 55-1520-240-23-10
16-24
DISASSEMBLE AND INSPECT FORWARD OR AFT CARGO HOOK (AVIM)
(Continued)
16-24
12.
Remove lockwire, bolt (30), packing (30.1), and
washer (30.2).
12.1.
Remove eight bolts (31) and washers (31.1) from
cover (32).
NOTE
Wires are identified at manufacture.
Before disconnecting any wire, make
sure wire is identified.
13.
Raise cover (32).
14.
Disconnect eight harness wires (33) from
modules (34). Use contact insertion/extraction
tool.
15.
Remove strap (35).
16.
Remove cover (32) and gasket (36).
16.1.
Inspect cover (32). There shall be no cracks.
17.
Remove lockwire, four screws (37), and four
washers (38). Remove wire harness (39) and
gasket (40) from cover (32).
17.1.
Inspect boot (40.1). There shall be no cracks,
cuts, or other damage that lets moisture into
harness (39).
16-123
