TM 55-1520-240-23-10
16-10
INSTALL SUPPORT BEAM AND BEARINGS
16-10
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 100 to 750 Inch-Pounds
Materials:
Cloths (E135)
Gloves (E184.1)
Methy-Ethyl-Ketone (E244)
Epoxy Primer (E292.1)
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
1.
Install bearing (1), groove facing up, on each end
of support beam (2).
2.
Install beam (2), support (3), facing forward, in
trolley supports (4).
3.
Install two u-bolts (5), four washers (6), and four
nuts (7). Torque nuts to 180 to 240 inch-pounds.
16-93