TM 55-1520-240-23-10
14-9
INSTALL WINCH
(Continued)
14-9
12.
Install four bolts (24) and washers (25).
13.
Secure panel (26) to bulkhead with two screws
(27).
CONNECT HOSES AND ELECTRICAL CONNECTOR
14.
Connect three hoses (28) as follows:
a.
HOIST UP to IN port.
b.
HOIST DOWN to OUT port.
c.
RETURN to CABLE port.
15.
Connect hose (29).
16.
Connect electrical connector (30).
INSPECT
FOLLOW-ON MAINTENANCE:
Install cockpit aft floor panel (Task 2-84).
Bleed winch hydraulic system (Task 7-333).
Install heater compartment blanket (Task 2-210).
Perform operational check (TM 55-1520-240-T).
END OF TASK
14-34