TM 55-1520-240-23-10
13-21
INSTALL HEATER EXHAUST PIPE
(Continued)
13-21
3.
If gasket (4) was removed, install new gasket.
4.
Insert stack (1) into support (5).
5.
Position lower end of pipe (2) on heater outlet
(6). Install clamp (7) and lockwire (E231).
6.
Install clamp (8) on bracket (9) and shroud (3).
7.
Slide stack (1) through support (5) until stack
protrudes 0.25 to 0.50 inch from fuselage (10).
Install clamp (11) on support and stack.
8.
Install clamp (12) on bracket (13) and stack (1).
13-80