TM 55-1520-240-23-10
12-49
INSTALL WINDSHIELD WIPER ACTUATOR (CONVERTER)
(Continued)
12-49
2.
Insert spare flexible shaft (3) in actuator (2).
NOTE
Actuator is in parked position when
splined shaft stops and an installed
wiper would be at inboard edge of
windshield. A few more rotations of
flexible shaft will move splined shaft in
opposite direction.
3.
Rotate shaft (3) to move splined shaft (4) of
actuator (2) to parked position.
4.
Remove shaft (3).
5.
Position actuator (2) on mount (5) with shaft (4)
through hole (6).
NO BREAK - WORK HARDER
6.
Connect flexible shaft (7) to actuator (2).
7.
Install actuator (2) with four bolts (8), and
washers (9).
8.
Tighten nut (10).
9.
Lockwire nut (10) to nut (11) on opposite side of
actuator (2). Use lockwire (E233).
12-110
