TM 55-1520-240-23-1
1-88
LUBRICATE LANDING GEAR
(Continued)
1-88
LUBRICATE AFT GEAR
4.
Wipe fittings clean with clean cloth (E120):
a.
Two fittings (4) at forward end of drag link (3).
b.
Two fittings (2) at aft end of drag link.
c.
Fitting (5) at aft end of swivel housing (6).
5.
Apply grease (E190) at fittings (2 and 4) until old
grease is forced out and new grease appears.
High pressure at swivel housing fitting
can damage gear. If high pressure is
needed to force out grease, remove
fitting and check for restriction.
6.
Apply grease (E190) at swivel housing fitting (5).
Use very low pressure. Apply grease until old
grease is forced out and new grease appears at
relief tip (7).
7.
Wipe off old grease with cloth (E120).
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
None
END OF TASK
1-320